Load Trail SE: Angle Frame Utility
Specifications, configurations, and buyer fit for the Load Trail SE Angle Frame Utility.
The SE is a current Load Trail model. The published specifications below come from the manufacturer’s spec sheet. Confirm the current numbers with your dealer before you buy.
Published Specifications
| GVWR | 2,990 lb |
|---|---|
| Empty weight | 674-1,254 lb |
| Lengths | 8-16 ft |
| Width | 48-83 in bed |
| Axles | Single 3,500 lb |
| Coupler | Bumper pull |
| Deck height | 19 in |
2 in x 3 in x 3/16 in angle iron frame; 3 in channel tongue; 2 in x 3 in angle iron, 24 in on-center crossmembers; treated wood floor; 2 in x 2 in square tube w/2 in x 2 in angle iron uprights (weld-on) side rails; 2,000 lb top-wind jack
Read from the manufacturer's published page on September 25, 2026. Options and model-year changes alter these figures, verify the current sheet with the dealer.
Manufacturer Source
Load Trail listed this model family as active when checked on July 19, 2026. Confirm current specifications, options, and local availability directly with the manufacturer and dealer.
View the official Load Trail SE page →