H&H Single Axle Gravity Tilt: Single Axle Gravity Tilt
Specifications, configurations, and buyer fit for the H&H Single Axle Gravity Tilt Single Axle Gravity Tilt.
The Single Axle Gravity Tilt is a current H&H model. The published specifications below come from the manufacturer’s spec sheet. Confirm the current numbers with your dealer before you buy.
Published Specifications
| GVWR | 6,000-9,900 lb |
|---|---|
| Empty weight | 1,390-2,500 lb |
| Payload | 4,610-7,650 lb |
| Lengths | 10-12 ft |
| Width | 62-78 in bed |
| Axles | Single, 5,200-8,000 lb per axle, torsion |
Manufacturer highlights: hydraulic cushion cylinder, knife-edge diamond plate dovetail, torsion axle, tongue mounted tool box
Read from the manufacturer's published page on September 25, 2026. Options and model-year changes alter these figures, verify the current sheet with the dealer.
Manufacturer Source
H&H listed this model family as active when checked on July 19, 2026. Confirm current specifications, options, and local availability directly with the manufacturer and dealer.
View the official H&H Single Axle Gravity Tilt page →