CAM Superline Deckover Tilt: Deckover Tilt
Specifications, configurations, and buyer fit for the CAM Superline Deckover Tilt Deckover Tilt.
The Deckover Tilt is a current CAM Superline model. The published specifications below come from the manufacturer’s spec sheet. Confirm the current numbers with your dealer before you buy.
Published Specifications
| GVWR | 15,400-17,600 lb |
|---|---|
| Lengths | 22-24 ft |
| Width | 102 in bed |
| Axles | Tandem, 7,000-8,000 lb per axle |
Manufacturer highlights: I-beam frame and tongue, dual hydraulic cylinders, knife-edge reverse beavertail approach, rear impact guard
Read from the manufacturer's published page on September 25, 2026. Options and model-year changes alter these figures, verify the current sheet with the dealer.
Manufacturer Source
CAM Superline listed this model family as active when checked on July 19, 2026. Confirm current specifications, options, and local availability directly with the manufacturer and dealer.
View the official CAM Superline Deckover Tilt page →