Load Trail SH: Single Axle Scissor Hauler
Specifications, configurations, and buyer fit for the Load Trail SH Single Axle Scissor Hauler.
The SH is a current Load Trail model. The published specifications below come from the manufacturer’s spec sheet. Confirm the current numbers with your dealer before you buy.
Published Specifications
| GVWR | 7,000 lb |
|---|---|
| Empty weight | 1,590-1,925 lb |
| Lengths | 10-12 ft |
| Width | 60-77 in bed |
| Axles | Single 7,000 lb |
| Brakes | Electric |
| Coupler | Bumper pull or pintle |
| Deck height | 18 in |
3 in x 5 in angle iron frame; 5 in channel tongue; 3 in channel, 16 in on-center crossmembers; 1/8 in steel diamond plate floor; 8 ft slide-in ramps; 11-degree tilt; 5,000 lb top-wind jack
Read from the manufacturer's published page on September 25, 2026. Options and model-year changes alter these figures, verify the current sheet with the dealer.
Manufacturer Source
Load Trail listed this model family as active when checked on July 19, 2026. Confirm current specifications, options, and local availability directly with the manufacturer and dealer.
View the official Load Trail SH page →